|
Snash
2000 Vinyl coating
For
use on vinyl, linoleum, terrazzo tiles, ceramic tiles, cement
and wood
Specifications:
SNASH
2000 Vinil, a special cleaning/maintenance formula for daily
use, to increase safety. SNASH 2000 Vinil cleans and helps
maintain the shine of any coating, on any floor surface. But
most important is its ability to ensure a high friction factor
and enhance the properties that prevent slipping on any surface
which has been treated with SNASH 2000 Vinil.
In
tests conducted on floor surfaces using a horizontal friction
meter, based on the specifications of the American Safety
Council, it was discovered that the regular friction factor
on dry surfaces exceeds the recommended levels of 5 and 6
as defined for horizontal surfaces by the American Safety
Council and the Americans with Disabilities Act of January
1992 (ADA).
Most
floor finishings do not meet the ADA requirements. In any
case, daily cleaning with SNASH 2000 Vinil increases the slip-resistance
factor to a level of 7, which exceeds ADA requirements.
Questions:
How
often should I use SNASH 2000 Vinil?
Every
day. SNASH 2000 Vinil replaces the cleaning agents you have
been using up to now. It cleans and preserves the shine, while
increasing the floor's anti-slip properties.
Is
SNASH 2000 guaranteed?
Yes,
for one year. How long can I store SNASH 2000 Vinil if it
hasn't been used? For one year.
What
kind of coverage does SNASH 2000 Vinil provide? One gallon
(3.79 liters) covers an area of about 6,000 square meters.
When
can I walk on the treated surface?
As
soon as the floor dries.
Is
there a money-back guarantee?
Yes!
If you aren't satisfied with the performance of SNASH 2000
Vinil for any reason at all,simply return it to us for a full
r.
How
do you use SNASH 2000 Vinil?
SNASH
2000 Vinil is applied using a wet rag or with an automatic
floor polisher.
Instructions
for use
1.
Thoroughly sweep or vacuum the floor to remove all dust and
dirt.
2.
To obtain maximum results, you should first clean floors with
a high concentration of grease or protein-based material using
SNASH 2000 Grease Remover.
3.
Dilute 100 ml. of SNASH 2000 Vinil in one gallon (3.79 liters)
of hot water.
4.
With a wet rag: Use two buckets in order to keep the floor
from getting dirty again from grease or protein-based materials.
Clean the floor with a cotton cloth or one made of cotton/synthetic
blend. Allow the floor to dry completely. Do not rinse.
5.
With an automatic floor polisher: Place the SNASH 2000 Vinil
solution into the machine's feed container. You can use the
liquid at the same time for both cleaning and suction. Do
not rinse.
6.
In order to maintain or touch up the shine: If an area has
lost its shine, cushion the cleaner with a soft cloth and
operate on low or medium speed.
our products:
Snash 2000 for commertial and
industr
Snash
2000 vinyl (anti slip wax)
Snash
2000 epoxy coating
Snash
2000 Grease remover
Snash
2000 formula 303 do it your self
Exclusive
product
Eurosnash 2000
BV Amsterdam Nederland phone no' : +31-6-52122762
Two-year
warranty
|
