Snash 2000 greese remover
A unique formula for removing heavy grease (without caustic
soda), which does not harm the treated surface and prevents
slipping due to slippery floors or surfaces.
The Grease Remover is suitable for all types of surfaces made
of ceramic tile, cement, vinyl, metal, and painted surfaces.
Specifications:
This concentrated grease remover is another product in the
SNASH 2000 series suitable for daily use. It contains a special
formula that repels and breaks up grease, enables effective
cleaning and maintains the anti-slip properties during the
warranty period on surfaces exposed to food or protein-based
material, and areas where grease buildup can cause slippery
conditions.
Instructions for use:
1. Shock treatment for floors – SNASH 2000 grease
remover can be used as a shock treatment for oily surfaces,
by diluting the solution at a 1:3 ratio (1 part SNASH 2000
with 3 parts added water).
2. Daily usage – Dilute SNASH 2000 concentrated grease
remover in hot water according to the type and quantity of
materials you need to clean, as follows:
For light cleaning – 50 ml. grease remover for 1 liter of
water (1:20).
For moderate cleaning – 67 ml. grease remover for 1 liter
of water (1:15).
For heavy cleaning – 125 ml. grease remover for 1 liter
of water (1:8).
SNASH 2000 grease remover can be used with either an automatic
floor polisher or a wet rag. The most positive friction factor
can be obtained if the product is used consistently in a suitable
cleaning program to meet the specific conditions of the area
on which it is being used. In order to keep grease and protein-based
materials from reappearing on the surface when cleaning with
a wet cloth, use the two-bucket method, where one bucket has
the SNASH 2000 cleaning material and the second one has the
used solution. To clean stubborn spots, or oils and protein-based
materials, you can use the cleaning solution on a wet rag
or in a pressure spray. The surface should be polished with
a hard-bristle brush or an automatic polisher, and after keeping
the solution on the surface for 5 minutes, remove the dissolved
material using wet suction or with a cloth.Complete the cleaning
process by wiping with a damp cloth.
Technical specifications
